Welcome

Latest FAQs

We ship all of our orders the day after they are received. If you have placed your order before 10:00 am, it is very likely that it will be shipped the same day.

Yes, you just have to select it in the shipping options.

Please note that orders may take a day to be ready.

We try to maintain a stable stock of all our products. Please note that the website will only allow you to order products that are available at that time.

If there is no stock available, you can set an alarm on the product page that will notify you when the product is back in stock.

If you urgently need to purchase a product that is not available, contact us and we will try to solve it.

Don't worry, we understand that these things can happen. The only thing we are going to ask of you is that the filament has not been opened. To manage a filament change due to diameter reasons, you can send us an email to info@3dfils.com or use the form contact.

Remember to have the order reference on hand to speed up the process.

As you all know in 3D printing objects are built layer by layer. This implies that each layer supports the next layer. This next layer may not coincide exactly with the previous one, which causes part of the layer to be exposed, that is, without being supported by the previous layer.

There is a point where this is not possible since the upper layers do not have enough support from the lower ones. This occurs when we exceed an angle of 45º. To solve this problem and for the piece to hold up during printing we need to use the support structures.

What are support structures in 3D printing?

The support structures are elements that are printed together with the model but that are not part of the original design and that serve to support the protruding parts of the models that exceed 45º.

Rule

These support structures can be made of the same material as the main piece or, if we have an extra extruder, of another material that is easier to remove.

The support structures are created from the same program with which we prepare the 3D printing and their correct configuration is crucial to obtain a good finish in the parts in which we use them.

The support problem with flexible materials

\r\n

When we use rigid materials such as PLA remove the support, although sometimes tedious, it is usually simple. With the appropriate tools we break the support structure and remove it. This is because support structures are often thin and brittle with rigid materials.

\"\"
Removing flexible supports

With flexible materials things change. Although the support structures remain thin, the very nature of the material means that it does not break. So the only way to remove the support material is by stretching or cutting in the worst cases.

What should be taken into account when configuring support for flexible materials?

There are two key aspects when setting it up: the support pattern and the gap between the support and the part.

As we have said before, the only way to remove the support in 3D printed parts with flexible filament is to stretch. This is why we must configure the support in a way that makes this task easier for us.

Speaking of thesupport pattern, it is best to reduce the contact points by trying to make the supported surface as large as possible. We have to avoid types of support in which the structure crosses each other, such as a support with a grid pattern. Our choice is always a support with a cross pattern since the area it supports is much larger but the contact points are always a single line.

To see this we are going to compare the single line pattern with the cross pattern.

\"\ "

As you can see for the same area, the cross pattern supports more areas than the others with the advantage that it always maintains the minimum contact surface, not like the grid support that when intersecting creates areas where removing the support is going to be more difficult for us.

The other fundamental parameter is the separation between the piece and the support. If we leave it too close together, the support will fuse with the piece, making its removal impossible. If we separate it too much it will not be able to withstand the layers of 3D printing, resulting in a disaster.

Recommended parameters to generate support with eFil

Taking into accountAll of the above, the parameters we recommend for the eFil range of flexible filaments are:

Cantilever angle 45º
Density 25%
Support pattern Cross
Z distance on the support 0.19mm
X/Y distance on the support 0.7mm
Priority in support distances Z over X/Y

Payment methods available in Spain
Bank transfer
You can conveniently transfer the amount of your purchase to our account. As soon as payment is made, your order will be shipped (It may take 4 to 5 business days).
Credit card
Pay easily with one of these credit cards: VISA, Mastercard, American Express, Diners Club, JCB.
Credit card
Pay easily and securely with your Maestro bank card for fast processing of your online purchases.
Paypal
Pay securely through Paypal account.

If you need to contact us, you can do so in the following ways:

Remember that our customer service hours are from 10:00 to 16:00

If you buy from a European company with a valid VAT number you can get your invoice tax free. To do this, enter your VAT number in the corresponding box in the selection process. If the number is valid, once entered the taxes will automatically disappear.

Your orders can go through five different states:

  • Payment accepted: This is the default status when you have placed an order and it has been processed correctly.
  • Pending payment by bank transfer: If you have selected the bank transfer method, this will be the status of the order until we verify that the payment has been made.
  • Payment error: This status can occur when an error has occurred in the payment gateway or the order has been canceled at the time of payment. If you do not know why the error may have occurred, please contact us.
  • Shipped: This status applies from the moment we process the shipment and it leaves our facilities. From this moment onwards, shipment tracking is now available.
  • Delivered: The status that your order will have once it is delivered. If your order has this status but you have not received the merchandise, please contact us.

Best sellers

eFil TPU 60D Lime

€10.48 (tax incl.)
3 reviews
eFil-HT  is the  ultra resistant filament  of 3Dfils. It is a semi-rigid material that combines the good of flexible filaments with rigid ones. With a   higher abrasion resistance than nylon and as  easy to print  as...
Quick view
Product available with different options

eFil TPU 90A White

€10.48 (tax incl.)
4 reviews
eFil TPU 90A belongs to the eFil family of flexible TPU-based filaments. Its hardness is Shore 90A , which combines a high degree of flexibility while maintaining ease of printing . In addition, we can obtain...
Quick view
Product available with different options

eFil TPU 85A Blue

€15.95 (tax incl.)
1 review
eFil TPU 85A belongs to the eFil family of flexible TPU-based filaments. Its hardness is Shore 85A, similar to that found in the heel of a shoe. This filament is recommended for advanced users, as it requires a...
Quick view
Product available with different options

eFil TPU 90A Brown Beige

€10.48 (tax incl.)
2 reviews
eFil TPU 90A belongs to the eFil family of flexible TPU-based filaments. Its hardness is Shore 90A , which combines a high degree of flexibility while maintaining ease of printing . In addition, we can obtain...
Quick view
Product available with different options

eFil TPU 60D Yellow

€10.48 (tax incl.)
1 review
eFil TPU 60D belongs to the eFil family of flexible TPU-based filaments. Its hardness is Shore 60D , higher than the standard hardness of flexible filaments for 3D printing on the market. The 60D hardness is what...
Quick view
Product available with different options

esFil PETG MAX White

€21.78 (tax incl.)
2 reviews
The esFil PETG MAX filament is a PETG based filament manufactured in Spain . PETG is the perfect material for the manufacture of functional parts by means of 3D printing. PETG is a filament that has little...
Quick view
In Stock

eFil TPU 90A Orange

€35.73 (tax incl.)
4 reviews
eFil TPU 90A belongs to the eFil family of flexible TPU-based filaments. Its hardness is Shore 90A , which combines a high degree of flexibility while maintaining ease of printing . In addition, we can obtain...
Quick view
Product available with different options

eFil TPU 60D Beige

€18.74 (tax incl.)
3 reviews
eFil TPU 60D belongs to the eFil family of flexible TPU-based filaments. Its hardness is Shore 60D , higher than the standard hardness of flexible filaments for 3D printing on the market. The 60D hardness is what...
Quick view

eFil TPU 60D Natural

€10.48 (tax incl.)
eFil TPU 60D belongs to the eFil family of flexible TPU-based filaments. Its hardness is Shore 60D , higher than the standard hardness of flexible filaments for 3D printing on the market. The 60D hardness is what...
Quick view
Product available with different options

esFil PLA MAX Black

€14.95 (tax incl.)
1 review
Filamento PLA Black 1.75mm 1Kg fabricado en España a partir de PLA especialmente formulado para su uso en impresora 3D.  Ver descripción completa
Quick view
In Stock

eFil TPU 90A Electric Blue

€35.73 (tax incl.)
eFil TPU 90A belongs to the eFil family of flexible TPU-based filaments. Its hardness is Shore 90A , which combines a high degree of flexibility while maintaining ease of printing . In addition, we can obtain...
Quick view
Product available with different options

eFil TPU 90A Lime

€10.48 (tax incl.)
eFil TPU 90A belongs to the eFil family of flexible TPU-based filaments. Its hardness is Shore 90A , which combines a high degree of flexibility while maintaining ease of printing . In addition, we can obtain...
Quick view
Last items in stock

eFil TPU 90A Yellow

€18.74 (tax incl.)
2 reviews
eFil TPU 90A belongs to the eFil family of flexible TPU-based filaments. Its hardness is Shore 90A , which combines a high degree of flexibility while maintaining ease of printing . In addition, we can obtain...
Quick view

abFil PLA 3D850 White

€20.90 (tax incl.)
1 review
The antibacterial filament abFil PLA 850 is made in Spain from PLA INGEO 3D850 from NatureWorks and has antibacterial protection, certified with ISO 22196, thanks to the incorporation of silver ions.
Quick view
In Stock

eFil TPU 85A OUTLET

€14.95 (tax incl.)
1 review
The outlet filament comes from the change of color in the manufacture, its quality is not affected eFil TPU 85A belongs to the eFil family of flexible TPU-based filaments. Its hardness is Shore 85A, similar to...
Quick view
Product available with different options
Close
Click for more products.
No products were found.

Menu

Settings

Share